Hello,

I have Cisco L3 3560G switch which directly connected with router . i have configured Vlan 2,3 on the switch and assign port 2 & 3 respectably. I want to management both vlan 2 & 3 from from L3 port g0/10 . please assist me how could it possible. .

network diagram attached.


Regards,
Mak

Remote into the switch CLI and manage the entire thing.

What do you mean by "I want to management both vlan 2 & 3"?

EDIT: As michoudi says you can do whatever you want on the switch once you are CLI'd onto it, there is no restriction depending on what interface/vlan you came in on.

_________________
---
David
CCIE R&S #38338, CCIP, CCNP

http://networkbroadcast.co.uk - My Blog
http://twitter.com/davidrothera

Thanks to all,

Problem has been resolved.


Mak

what was the solution, so that others may learn.

_________________
"If you're good at anticipating the human mind. It leaves nothing to chance."
-Jigsaw

just no switch port on port g0/10 and configure difference subnet on it .

I am lost.... ?? What was the actual issue and what was the actual fix to the actual issue?

umm with the console port you can destroy a switch, how much more control do you need?

_________________
Awesomesauce!!!!