Evening All,

I am trying to remove my BT Homehub2 and replace it with a router connected to the ADSL line using RJ11 to RJ45 cable in f0/0 configured ip address 86.177.164.200.

F0/1 is configured to 192.168.1.254 (current BT Homehub IP) this is connected to my 48port cisco switch in port GI1/0/48.
VLAN1 set to DHCP and my host is connected to GI1/0/2 and also configured to DHCP.

Ignoring the WAP for now, what am I doing wrong? I know it will be a small IP issue somewhere, do I need to configure GI1/0/48 and GI1/0/2 with IP address'? Am I using the wrong ISP address on my routers F0/0 port?

Any help, config logs would be appreciated.

Below I have copied some info from my BT home hub...

BT HH IP ADDRESS 192.168.1.254
Broadband ADSL Connected
Broadband username bthomehub@btbroadband.com
Connection time 0 days, 00:25:08
Data Transmitted/Received (MB) 3.4 / 2.7
Broadband username bthomehub@btbroadband.com
Password Not configured
TCP/IP settings
Broadband network IP address 86.177.164.200
Default gateway 217.32.144.64
Primary DNS 213.120.234.26
Secondary DNS 213.120.234.74

Thanks in advance.

Well my first question would be is, when your connected directly to the ADSL modem do you have connectivity.

I had not configured NAT/PAT! looking ok cheers