IPv6 design, deployment, standards, and best practices.
Post a reply
quatreduros
Junior Member
Posts:
78
Joined:
Wed Mar 07, 2012 5:27 pm
Certs:
CCNA, CCNP

EIGRP v6

Sat Mar 17, 2012 6:58 pm

I have configured OK the EIGRP protocol but I can't to make pinging or tracert
I have studied the enruting table but are OK.


Code: Select all

MADRID#sh ipv6 eigrp neighbors
IPv6-EIGRP neighbors for process 10
H   Address         Interface      Hold Uptime    SRTT   RTO   Q   Seq
                                   (sec)          (ms)        Cnt  Num
0   FE80::201:63FF:FE0D:9D53Se0/1/0        13   00:18:59  40     1000  0   13
1   FE80::20A:41FF:FEC7:7692Se0/3/0        13   00:18:58  40     1000  0   9

MADRID
C   2001:1111:2222:1::/64 [0/0]
     via ::, FastEthernet0/0
L   2001:1111:2222:1::C0A8:1/128 [0/0]
     via ::, FastEthernet0/0
C   2001:1111:2222:2::/64 [0/0]
     via ::, Serial0/3/0
L   2001:1111:2222:2::AC10:D601/128 [0/0]
     via ::, Serial0/3/0
C   2001:1111:2222:3::/64 [0/0]
     via ::, Serial0/1/0
L   2001:1111:2222:3::AC10:D701/128 [0/0]
     via ::, Serial0/1/0
D   2001:1111:2222:4::/64 [90/40514560]
     via FE80::201:63FF:FE0D:9D53, Serial0/1/0
D   2001:1111:2222:5::/64 [90/41024000]
     via FE80::20A:41FF:FEC7:7692, Serial0/3/0
     via FE80::201:63FF:FE0D:9D53, Serial0/1/0
D   2001:1111:2222:6::/64 [90/40514560]
     via FE80::20A:41FF:FEC7:7692, Serial0/3/0
L   FF00::/8 [0/0]
     via ::, Null0

ROMA#sh ipv6 eigrp neighbors
IPv6-EIGRP neighbors for process 10
H   Address         Interface      Hold Uptime    SRTT   RTO   Q   Seq
                                   (sec)          (ms)        Cnt  Num
0   FE80::2E0:F7FF:FE9E:33C7Se0/1/0        12   00:19:58  40     1000  0   8
1   FE80::20C:CFFF:FE53:7BC1Se0/3/0        14   00:19:57  40     1000  0   14


ROMA
D   2001:1111:2222:1::/64 [90/40514560]
     via FE80::2E0:F7FF:FE9E:33C7, Serial0/1/0
C   2001:1111:2222:2::/64 [0/0]
     via ::, Serial0/1/0
L   2001:1111:2222:2::AC10:D602/128 [0/0]
     via ::, Serial0/1/0
D   2001:1111:2222:3::/64 [90/41024000]
     via FE80::2E0:F7FF:FE9E:33C7, Serial0/1/0
     via FE80::20C:CFFF:FE53:7BC1, Serial0/3/0
D   2001:1111:2222:4::/64 [90/3014400]
     via FE80::20C:CFFF:FE53:7BC1, Serial0/3/0
C   2001:1111:2222:5::/64 [0/0]
     via ::, Serial0/3/0
L   2001:1111:2222:5::AC10:D802/128 [0/0]
     via ::, Serial0/3/0
C   2001:1111:2222:6::/64 [0/0]
     via ::, FastEthernet0/0
L   2001:1111:2222:6::C0A8:2001/128 [0/0]
     via ::, FastEthernet0/0
L   FF00::/8 [0/0]
     via ::, Null0


BERLIN#sh ipv6 eigrp neighbors
IPv6-EIGRP neighbors for process 10
H   Address         Interface      Hold Uptime    SRTT   RTO   Q   Seq
                                   (sec)          (ms)        Cnt  Num
0   FE80::20C:85FF:FE3A:CC91Se0/3/0        12   00:20:46  40     1000  0   7
1   FE80::2E0:A3FF:FE37:DC22Se0/1/0        14   00:20:43  40     1000  0   10

ROMA
D   2001:1111:2222:1::/64 [90/40514560]
     via FE80::20C:85FF:FE3A:CC91, Serial0/3/0
D   2001:1111:2222:2::/64 [90/41024000]
     via FE80::20C:85FF:FE3A:CC91, Serial0/3/0
     via FE80::2E0:A3FF:FE37:DC22, Serial0/1/0
C   2001:1111:2222:3::/64 [0/0]
     via ::, Serial0/3/0
L   2001:1111:2222:3::AC10:D702/128 [0/0]
     via ::, Serial0/3/0
C   2001:1111:2222:4::/64 [0/0]
     via ::, FastEthernet0/0
L   2001:1111:2222:4::C0A8:1001/128 [0/0]
     via ::, FastEthernet0/0
C   2001:1111:2222:5::/64 [0/0]
     via ::, Serial0/1/0
L   2001:1111:2222:5::AC10:D801/128 [0/0]
     via ::, Serial0/1/0
D   2001:1111:2222:6::/64 [90/40514560]
     via FE80::2E0:A3FF:FE37:DC22, Serial0/1/0
L   FF00::/8 [0/0]
     via ::, Null0



I have attached topology here

PLease I need your help.
Attachments
EIGRPv6.png
EIGRPv6
EIGRPv6.png (158.66 KiB) Viewed 2691 times
User avatar
jdsilva
Post Whore
Posts:
5347
Joined:
Mon Jan 17, 2005 11:01 pm
Certs:
CCNP

Re: EIGRP v6

Sat Mar 17, 2012 7:47 pm

What are you trying to ping?
quatreduros
Junior Member
Posts:
78
Joined:
Wed Mar 07, 2012 5:27 pm
Certs:
CCNA, CCNP

Re: EIGRP v6

Sun Mar 18, 2012 2:45 pm

Yes but is impossible and don't know why. Futhermore I make a traceroute but the packet don't exit of interface...
User avatar
Agent Zed
Senior Member
Posts:
362
Joined:
Fri Sep 02, 2011 6:59 am
Certs:
CCNA, CCNP

Re: EIGRP v6

Mon Mar 19, 2012 5:19 am

Does PacketTracer even do IPv6?
Reggle
Post Whore
Posts:
1956
Joined:
Sun May 15, 2011 4:16 pm
Certs:
CCNA Security, CCNP, CCDP

Re: EIGRP v6

Mon Mar 19, 2012 5:43 am

Agent Zed wrote:Does PacketTracer even do IPv6?

VERY basic: it supports IPv6 addresses, and I believe static routes. But no dynamic routing, NAT64, and so on.
http://reggle.wordpress.com
quatreduros
Junior Member
Posts:
78
Joined:
Wed Mar 07, 2012 5:27 pm
Certs:
CCNA, CCNP

Re: EIGRP v6

Mon Mar 19, 2012 8:16 am

Then at now the problem is how to add images IOS cisco in GNS3.

I am Tecnician Telecomunication Engineer in Spain, my address is [removed] If you need to help me.
Thank you very match.
User avatar
mellowd
CCIE #38070
Posts:
13814
Joined:
Wed Jun 18, 2008 7:49 am
Certs:
CCIE (RS,SP), JNCIE-SP, BC-/SPNE/NP

Re: EIGRP v6

Mon Mar 19, 2012 12:30 pm

Removed the email address. Do not ask for illegal material here
quatreduros
Junior Member
Posts:
78
Joined:
Wed Mar 07, 2012 5:27 pm
Certs:
CCNA, CCNP

Re: EIGRP v6

Tue Mar 20, 2012 5:16 am

Excuse me, I didn't know

At now I am to try to configure EIGRP IPv6 in GNS3. But after enable in global form IPv6 when introduce the command: ipv6 routereigrp 10 The program give me a mistake in console.

Code: Select all
   
BARCELONA>en
BARCELONA#conf ter
Enter configuration commands, one per line.  End with CNTL/Z.
BARCELONA(config)#ipv6 unicast-routing
BARCELONA(config)#int fa0/0
BARCELONA(config-if)#ipv6 eigrp router 10
                           ^
% Invalid input detected at '^' marker.


attached here the GNS topology,
Attachments
EIGRP IPv6.png
EIGRPv6 GN3
EIGRP IPv6.png (23.41 KiB) Viewed 2555 times
User avatar
Agent Zed
Senior Member
Posts:
362
Joined:
Fri Sep 02, 2011 6:59 am
Certs:
CCNA, CCNP

Re: EIGRP v6

Tue Mar 20, 2012 9:28 am

Type ipv6 as you did and hit the ? mark, this may help.
Reggle
Post Whore
Posts:
1956
Joined:
Sun May 15, 2011 4:16 pm
Certs:
CCNA Security, CCNP, CCDP

Re: EIGRP v6

Tue Mar 20, 2012 9:39 am

Your IOS does not support it I think. And I haven't found any IOS for GNS3 that will so far. Which version IOS are you using?
http://reggle.wordpress.com
User avatar
mellowd
CCIE #38070
Posts:
13814
Joined:
Wed Jun 18, 2008 7:49 am
Certs:
CCIE (RS,SP), JNCIE-SP, BC-/SPNE/NP

Re: EIGRP v6

Tue Mar 20, 2012 11:18 am

You're typing it wrong.

You need to type: ipv6 router eigrp 10
quatreduros
Junior Member
Posts:
78
Joined:
Wed Mar 07, 2012 5:27 pm
Certs:
CCNA, CCNP

Re: EIGRP v6

Fri Mar 23, 2012 6:39 pm

I am using C3620 IOS, and about the typed ipv6 router eigrp 10 is OK. Sorry I wrote bad.

Still not resolve.
User avatar
mellowd
CCIE #38070
Posts:
13814
Joined:
Wed Jun 18, 2008 7:49 am
Certs:
CCIE (RS,SP), JNCIE-SP, BC-/SPNE/NP

Re: EIGRP v6

Sat Mar 24, 2012 4:11 am

You need to no shut your eigrp IPv6 instance.
Horrors
New Member
Posts:
1
Joined:
Sun Mar 25, 2012 7:25 pm

see ya again

Mon Mar 26, 2012 4:46 pm

hope you will do same things again :)
'
Post a reply
Return to IPv6

Who is online

Users browsing this forum: No registered users and 7 guests