networking-forum.com
Community Blog • Community Wiki * Register  * Search  * Login
View unanswered posts • View active topics

Board index » Other Technologies » IPv6

All times are UTC - 6 hours [ DST ]


Post new topic Reply to topic  Page 1 of 1
  [ 14 posts ] 
  Print view Previous topic | Next topic 
Author Message
quatreduros
 Post subject: Configuring IPV6 Basic
PostPosted: Sun Apr 29, 2012 10:37 am 
Offline
Junior Member
Junior Member

Joined: Wed Mar 07, 2012 5:27 pm
Posts: 77
Location: Barcelona
Certs: CCNA, CCNP
I have added the ipv6 addres to routers of topology but there isn't connection between ajacents routers. I have attached a document with the followed steps in the configuration.

My objective is to pinging between adjacents router to after apply routing procotocol.


Code:
GANDIA#sh ipv6 interface brief
Serial0/0                  [up/up]
    FE80::FFFF:FE10:45C5
    2001:1111:2222:1::C0A8:2



GANDIA#sh run
Building configuration...

Current configuration : 723 bytes
!
version 12.3
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname GANDIA
!
boot-start-marker
boot-end-marker
!
!
no aaa new-model
ip subnet-zero
!
!
no ip domain lookup
!
ip cef
!
!
interface Serial0/0
 no ip address
 ipv6 address 2001:1111:2222:1::C0A8:2/64
 serial restart-delay 0
!
!
no ip http server
ip classless
!
line con 0
 exec-timeout 0 0
 logging synchronous
line aux 0
line vty 0 4
!
!
end

--------------------------------------------------------------------------------------------------------------------

VALENCIA#sh ipv6 interface brief
Serial0/0                  [up/up]
    FE80::FFFF:FE10:45C5
    3000::1
Serial0/1                  [up/up]
    FE80::FFFF:FE10:45C5
    2001:1111:2222:1::C0A8:1



VALENCIA#sh run
Building configuration...

Current configuration : 776 bytes
!
version 12.3
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname VALENCIA
!
boot-start-marker
boot-end-marker
!
!
no aaa new-model
ip subnet-zero
!
!
no ip domain lookup
!
ip cef
!
!
interface Serial0/0
 no ip address
 ipv6 address 3000::1/64
 serial restart-delay 0
 clock rate 64000
!
interface Serial0/1
 no ip address
 ipv6 address 2001:1111:2222:1::C0A8:1/64
 serial restart-delay 0
 clock rate 64000
!
!
no ip http server
ip classless
!
line con 0
 exec-timeout 0 0
 logging synchronous
line aux 0
line vty 0 4
!
!
end

-----------------------------------------------------------------------------------------------------------------------------

BARCELONA#sh ipv6 interface brief
Serial0/0                  [up/up]
    FE80::FFFF:FE10:45C5
    3000::2
Serial0/1                  [up/up]
    FE80::FFFF:FE10:45C5
    2001:1111:2222:2::C0A8:101


BARCELONA#sh run
Building configuration...

Current configuration : 761 bytes
!
version 12.3
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname BARCELONA
!
boot-start-marker
boot-end-marker
!
!
no aaa new-model
ip subnet-zero
!
!
no ip domain lookup
!
ip cef
!
!
!
interface Serial0/0
 no ip address
 ipv6 address 3000::2/64
 serial restart-delay 0
!
interface Serial0/1
 no ip address
 ipv6 address 2001:1111:2222:2::C0A8:101/64
 serial restart-delay 0
 clock rate 64000
!
no ip http server
ip classless
!
line con 0
 exec-timeout 0 0
 logging synchronous
line aux 0
line vty 0 4
!
!
end

----------------------------------------------------------------------------------------------------------------------------------------
PRAT_LLOBREGAT#sh ipv6 interface brief
Serial0/0                  [up/up]
    FE80::FFFF:FE10:45C5
    2001:1111:2222:2::C0A8:102

RAT_LLOBREGAT#sh run
Building configuration...

Current configuration : 733 bytes
!
version 12.3
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname PRAT_LLOBREGAT
!
boot-start-marker
boot-end-marker
!
!
no aaa new-model
ip subnet-zero
!
!
no ip domain lookup
!
ip cef
!
!
interface Serial0/0
 no ip address
 ipv6 address 2001:1111:2222:2::C0A8:102/64
 serial restart-delay 0
!
!
no ip http server
ip classless

line con 0
 exec-timeout 0 0
 logging synchronous
line aux 0
line vty 0 4
!
!
end







Thanks,


Attachments:
File comment: Screen Routers
Topology&ScreenConfigurationIPv6.jpg
Topology&ScreenConfigurationIPv6.jpg [ 227.09 KiB | Viewed 859 times ]
Top
 Profile  
 
Captainserious
PostPosted: Sun Apr 29, 2012 3:12 pm 
Offline
New Member
New Member

Joined: Wed Oct 12, 2011 6:04 am
Posts: 19
Certs: CCNA
Can't see anything outright wrong with this, have you made sure you've got the IP addresses configured on the correct interfaces? Can you post a show ipv6 int brief.
Top
 Profile  
 
Rakurai
PostPosted: Sun Apr 29, 2012 3:40 pm 
Offline
Member
Member

Joined: Wed Nov 17, 2010 3:13 pm
Posts: 142
Certs: A+, N+, Sec+, CCENT
ipv6 unicast-routing is missing from the interfaces, i think..... haven't labbed IPv6 in a while.
Top
 Profile  
 
Captainserious
PostPosted: Sun Apr 29, 2012 3:41 pm 
Offline
New Member
New Member

Joined: Wed Oct 12, 2011 6:04 am
Posts: 19
Certs: CCNA
Rakurai wrote:
ipv6 unicast-routing is missing from the interfaces, i think..... haven't labbed IPv6 in a while.


Not sure it would let you add IPv6 addresses if you didn't have it on... I could be wrong though!
Top
 Profile  
 
srg
PostPosted: Sun Apr 29, 2012 3:44 pm 
Online
Post Whore
Post Whore
User avatar

Joined: Thu Dec 30, 2010 2:05 pm
Posts: 1123
Location: Stockholm, SE
Certs: CCNP, CCNP SP, CCDA, CCNA DC, CCNA W, HP MASE
Rakurai wrote:
ipv6 unicast-routing is missing from the interfaces, i think..... haven't labbed IPv6 in a while.

ipv6 unicast-routing is a global command. IPv6 is activated on the interface when you give it a global adress, or with "ipv6 enable" which will give it just the link-local.

_________________
som om sinnet hade svartnat för evigt.
Top
 Profile  
 
Rakurai
PostPosted: Sun Apr 29, 2012 3:55 pm 
Offline
Member
Member

Joined: Wed Nov 17, 2010 3:13 pm
Posts: 142
Certs: A+, N+, Sec+, CCENT
srg wrote:
Rakurai wrote:
ipv6 unicast-routing is missing from the interfaces, i think..... haven't labbed IPv6 in a while.

ipv6 unicast-routing is a global command. IPv6 is activated on the interface when you give it a global adress, or with "ipv6 enable" which will give it just the link-local.



Yes, it is global.... read my notes wrong.
Top
 Profile  
 
quatreduros
PostPosted: Sun Apr 29, 2012 6:06 pm 
Offline
Junior Member
Junior Member

Joined: Wed Mar 07, 2012 5:27 pm
Posts: 77
Location: Barcelona
Certs: CCNA, CCNP
Thanks everybody, I have added the global command ipv6 unicast-routing and the command ipv6 enable in the interface OK.

See the next changes

Code:
VALENCIA(config)#ipv6 unicast-routing
[b]VALENCIA(config)#int serial 0/0[/b]
VALENCIA(config-if)#ipv6 address 3000::1/64
VALENCIA(config-if)#clock rate 64000
VALENCIA(config-if)#ipv6 enable
VALENCIA(config-if)#no sh
[b]VALENCIA(config)#int serial0/1[/b]
VALENCIA(config-if)#ipv6 address 2001:1111:2222:1::C0A8:1/64
VALENCIA(config-if)#clock rate 64000
VALENCIA(config-if)#ipv6 enable
VALENCIA(config-if)#no sh

GANDIA(config)#ipv6 unicast-routing
[b]GANDIA(config)#int serial 0/0[/b]
GANDIA(config-if)#ipv6 address 2001:1111:2222:1::C0A8:2/64
GANDIA(config-if)#no sh
GANDIA(config-if)#ipv6 enable


BARCELONA(config)#ipv6 unicast-routing
[b]BARCELONA(config)#int serial 0/0[/b]
BARCELONA(config-if)#ipv6 address  3000::2/64
BARCELONA(config-if)#ipv6 enable
BARCELONA(config-if)#no sh
[b]BARCELONA(config-if)#int serial 0/1[/b]
BARCELONA(config-if)#ipv6 address 2001:1111:2222:2::C0A8:101/64
BARCELONA(config-if)#ipv6 enable
BARCELONA(config-if)#clock rate 64000
BARCELONA(config-if)#no sh

PRAT_LLOBREGAT(config)#ipv6 unicast-routing
[b]PRAT_LLOBREGAT(config)#int serial 0/0[/b]
PRAT_LLOBREGAT(config-if)#ipv6 address 2001:1111:2222:2::C0A8:102/64
PRAT_LLOBREGAT(config-if)#ipv6 enable
PRAT_LLOBREGAT(config-if)#no sh


[b]VALENCIA#sh ipv6 interface brief[/b]
Serial0/0                  [up/up]
    FE80::FFFF:FE10:45C5
    3000::1
Serial0/1                  [up/up]
    FE80::FFFF:FE10:45C5
    2001:1111:2222:1::C0A8:1



[b]BARCELONA#sh ipv6 interface brief[/b]
Serial0/0                  [up/up]
    FE80::FFFF:FE10:45C5
    3000::2
Serial0/1                  [up/up]
    FE80::FFFF:FE10:45C5
    2001:1111:2222:2::C0A8:101

[b]PRAT_LLOBREGAT#sh ipv6 interface brief[/b]
Serial0/0                  [up/up]
    FE80::FFFF:FE10:45C5
    2001:1111:2222:2::C0A8:102


[b]GANDIA#sh ipv6 interface brief[/b]
Serial0/0                  [up/up]
    FE80::FFFF:FE10:45C5
    2001:1111:2222:1::C0A8:2

THE SHOW RUN COMMANDS
[b]VALENCIA#sh ru[/b]
Building configuration...

Current configuration : 768 bytes
!
version 12.3
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname VALENCIA
!
boot-start-marker
boot-end-marker
!
!
no aaa new-model
ip subnet-zero
!
ip cef
[b]ipv6 unicast-routing[/b]
!
interface Serial0/0
 no ip address
 ipv6 address 3000::1/64
 ipv6 enable
 serial restart-delay 0
 clock rate 64000
!
interface Serial0/1
 no ip address
 ipv6 address 2001:1111:2222:1::C0A8:1/64
 ipv6 enable
 serial restart-delay 0
 clock rate 64000
!
!
ip http server
ip classless
!
!
line con 0
line aux 0
line vty 0 4
 login
!
!
end


[b]BARCELONA#sh run[/b]
Building configuration...

Current configuration : 761 bytes
!
version 12.3
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname BARCELONA
!
boot-start-marker
boot-end-marker
!
!
no aaa new-model
ip subnet-zero
!
!
!
ip cef
ipv6 unicast-routing
!
!
!
interface Serial0/0
 no ip address
 ipv6 address 3000::2/64
 ipv6 enable
 serial restart-delay 0
 no fair-queue
!
interface Serial0/1
 no ip address
 ipv6 address 2001:1111:2222:2::C0A8:101/64
 ipv6 enable
 serial restart-delay 0
 clock rate 64000
!
!
ip http server
ip classless
line con 0
line aux 0
line vty 0 4
!
!
end


[b]GANDIA#sh run[/b]
Building configuration...

Current configuration : 710 bytes
!
version 12.3
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname GANDIA
!
boot-start-marker
boot-end-marker
!
!
no aaa new-model
ip subnet-zero
!
!
!
ip cef
ipv6 unicast-routing
!
interface Serial0/0
 no ip address
 ipv6 address 2001:1111:2222:1::C0A8:2/64
 ipv6 enable
 serial restart-delay 0
 no fair-queue
!
!
ip http server
ip classless
!
line con 0
line aux 0
line vty 0 4
!
!
end


[b]PRAT_LLOBREGAT#sh run[/b]
Building configuration...
Current configuration : 720 bytes
!
version 12.3
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname PRAT_LLOBREGAT
!
boot-start-marker
boot-end-marker

no aaa new-model
ip subnet-zero
ip cef
ipv6 unicast-routing
!
interface Serial0/0
 no ip address
 ipv6 address 2001:1111:2222:2::C0A8:102/64
 ipv6 enable
 serial restart-delay 0
 no fair-queue
!
!
ip http server
ip classless
!
line con 0
line aux 0
line vty 0 4
!
!
end



I have checked and all is OK. But is impossible to pinging between adjacents routers.

VALENCIA#ping 3000::2

Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 3000::2, timeout is 2 seconds:
.....
Success rate is 0 percent (0/5)


PRAT_LLOBREGAT#ping 2001:1111:2222:2::C0A8:101

Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 2001:1111:2222:2::C0A8:101, timeout is 2 seconds:
.....
Success rate is 0 percent (0/5)

Probably will be a silly wrong but this is crazy.
Top
 Profile  
 
ristau5741
PostPosted: Mon Apr 30, 2012 7:36 am 
Offline
Post Whore
Post Whore
User avatar

Joined: Tue Aug 21, 2007 2:15 pm
Posts: 8260
Location: Frederick MD
Certs: Instanity
I thought there was a different command to ping in ipv6
maybe i"m thinking about something else.

ping ipv6 [ipv6-address]

_________________
"If you're good at anticipating the human mind. It leaves nothing to chance."
-Jigsaw
Top
 Profile  
 
quatreduros
PostPosted: Mon Apr 30, 2012 9:51 am 
Offline
Junior Member
Junior Member

Joined: Wed Mar 07, 2012 5:27 pm
Posts: 77
Location: Barcelona
Certs: CCNA, CCNP
Sorry, I wrote bad, but with command ping ipv6 [ipv6 address] neither there are connection between adjacents devices.

GANDIA#ping ipv6 2001:1111:2222:1::C0A8:1

Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 2001:1111:2222:1::C0A8:1, timeout is 2 seconds:
.....
Success rate is 0 percent (0/5)

Code:
VALENCIA#sh ipv6 interface brief
Serial0/0                  [up/up]
    FE80::FFFF:FE10:45C5
    3000::1
Serial0/1                  [up/up]
    FE80::FFFF:FE10:45C5
    2001:1111:2222:1::C0A8:1
Serial0/2                  [administratively down/down]
    unassigned
Serial0/3                  [administratively down/down]
    unassigned


Please anybody would can to make this exercise? Is 10 minutes so will checked that is impossible to pinging.

Thanks,
Top
 Profile  
 
srg
PostPosted: Mon Apr 30, 2012 1:54 pm 
Online
Post Whore
Post Whore
User avatar

Joined: Thu Dec 30, 2010 2:05 pm
Posts: 1123
Location: Stockholm, SE
Certs: CCNP, CCNP SP, CCDA, CCNA DC, CCNA W, HP MASE
In the absence of an ethernet interface it seems as if all serial interfaces on all routers has come up with the same link-local address of FE80::FFFF:FE10:45C5, which means that on all links DAD would have yelled DUP and put one side in stalled mode.

Please check "show ipv6 int s0/0" on GANDIA and "show ipv6 int s0/1" on VALENCIA, one of the side should show "IPv6 is stalled, link-local address is FE80::FFFF:FE10:45C5 [DUP]"

If that is the case, change one of the sides manually and it will work.

_________________
som om sinnet hade svartnat för evigt.
Top
 Profile  
 
quatreduros
PostPosted: Mon Apr 30, 2012 6:54 pm 
Offline
Junior Member
Junior Member

Joined: Wed Mar 07, 2012 5:27 pm
Posts: 77
Location: Barcelona
Certs: CCNA, CCNP
Oh my good!! This was the problem!!

I have searching information but don't find the command to change the address link-local



Code:
GANDIA>en
GANDIA#sh ipv6 int serial 0/0
Serial0/0 is up, line protocol is up
  IPv6 is stalled, link-local address is FE80::FFFF:FE10:45C5 [DUPLICATE]
  Global unicast address(es):
    2001:1111:2222:1::C0A8:2, subnet is 2001:1111:2222:1::/64 [TENTATIVE]
  Joined group address(es):
    FF02::1
    FF02::2
    FF02::1:FF10:45C5
    FF02::1:FFA8:2
  MTU is 1500 bytes
  ICMP error messages limited to one every 100 milliseconds
  ICMP redirects are enabled
  ND DAD is enabled, number of DAD attempts: 1
  ND reachable time is 30000 milliseconds
  Hosts use stateless autoconfig for addresses.




BARCELONA#sh ipv6 interface serial 0/0
Serial0/0 is up, line protocol is up
  IPv6 is stalled, link-local address is FE80::FFFF:FE10:45C5 [DUPLICATE]
  Global unicast address(es):
    3000::2, subnet is 3000::/64 [TENTATIVE]
  Joined group address(es):
    FF02::1
    FF02::2
    FF02::1:FF00:2
    FF02::1:FF10:45C5
  MTU is 1500 bytes
  ICMP error messages limited to one every 100 milliseconds
  ICMP redirects are enabled
  ND DAD is enabled, number of DAD attempts: 1
  ND reachable time is 30000 milliseconds
  Hosts use stateless autoconfig for addresses.
BARCELONA#


I have changed the link-local address and work OK!

GANDIA(config-if)#ipv6 address FE80::FFFF:FE10:45C6 link-local

Code:
GANDIA#sh ipv6 interface serial 0/0
Serial0/0 is up, line protocol is up
  IPv6 is enabled, link-local address is FE80::FFFF:FE10:45C6
  Global unicast address(es):
    2001:1111:2222:1::C0A8:2, subnet is 2001:1111:2222:1::/64
  Joined group address(es):
    FF02::1
    FF02::2
    FF02::1:FF10:45C6
    FF02::1:FFA8:2
  MTU is 1500 bytes
  ICMP error messages limited to one every 100 milliseconds
  ICMP redirects are enabled
  ND DAD is enabled, number of DAD attempts: 1
  ND reachable time is 30000 milliseconds
  Hosts use stateless autoconfig for addresses.
GANDIA#ping 2001:1111:2222:1::C0A8:1

Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 2001:1111:2222:1::C0A8:1, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 64/71/96 ms


Thanks for all! You are the best! I have been for days and nobody found the trouble.
Top
 Profile  
 
srg
PostPosted: Tue May 01, 2012 12:51 am 
Online
Post Whore
Post Whore
User avatar

Joined: Thu Dec 30, 2010 2:05 pm
Posts: 1123
Location: Stockholm, SE
Certs: CCNP, CCNP SP, CCDA, CCNA DC, CCNA W, HP MASE
Great :]. That is probably a PT bug, real routers shouldnt have come up with the same link-local everywhere.

Sent from my LT26i using Tapatalk 2

_________________
som om sinnet hade svartnat för evigt.
Top
 Profile  
 
Davidr
PostPosted: Tue May 01, 2012 3:44 am 
Offline
Senior Member
Senior Member

Joined: Wed Aug 24, 2011 1:43 am
Posts: 485
Location: Bournemouth, UK
Certs: CCNP
ipv6 unicast-routing allows the router to route packets.
if it is not there, then the router acts an ipv6 host.

that was my understanding from reading(still) the ipv6 chapters.
Top
 Profile  
 
srg
PostPosted: Tue May 01, 2012 4:07 am 
Online
Post Whore
Post Whore
User avatar

Joined: Thu Dec 30, 2010 2:05 pm
Posts: 1123
Location: Stockholm, SE
Certs: CCNP, CCNP SP, CCDA, CCNA DC, CCNA W, HP MASE
Davidr wrote:
ipv6 unicast-routing allows the router to route packets.
if it is not there, then the router acts an ipv6 host.

that was my understanding from reading(still) the ipv6 chapters.

yup that is correct.

_________________
som om sinnet hade svartnat för evigt.
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 14 posts ] 

Board index » Other Technologies » IPv6

All times are UTC - 6 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 2 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group