Cisco Works, SNMP, MIBs.
bsejdiu
New Member
Posts:
1
Joined:
Fri Dec 16, 2011 6:19 am
Certs:
CCNA CCNP

CiscoSecure ACS v3.0 to 5.2

Fri Dec 16, 2011 6:24 am

Hello to all,

I have an CiscoSecure ACS v3.0 and need to upgrade or transfer to the new CiscoSecure ACS v5.2.
Does anyone of you has information on how to do that ??

Thanks you in advance.

User avatar
mlan
Ultimate Member
Posts:
810
Joined:
Thu Nov 17, 2011 6:09 pm

Re: CiscoSecure ACS v3.0 to 5.2

Fri Dec 16, 2011 11:45 am

I believe you are going to have to upgrade from 3.0 to 4.x first. Check this guide out:

Migration Preinstallation Considerations
Before you begin, ensure that you configure your environment for migration. In addition to your ACS 4.x Windows source machine, you must deploy an ACS 4.x migration machine and an ACS 5.2 target machine.


http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.2/migration/guide/Migration_Install.html

User avatar
burnyd
Post Whore
Posts:
3159
Joined:
Fri Nov 13, 2009 5:15 pm
Certs:
CCIE R&S/SP,CCNP-SP,JNCIA,VCP510,VCA-DCV

Re: CiscoSecure ACS v3.0 to 5.2

Fri Dec 16, 2011 7:06 pm

acs 3.0 to 5.x is completely different. Acs3.0 was written under windows 5.x is under Centos. If you want to upgrade your going to have to do a clean wipe.

When we converted over I had to change all sorts of things since our reason was due to getting Nexus's and ACE load balancers that do not use privelage levels anymore. But, there is a way to go about saving your configuration and having it convereted into the 5.x
http://danielhertzberg.wordpress.com - I blog about networks!

'

Return to Cisco Network Management

Who is online

Users browsing this forum: No registered users and 5 guests