VoIP, Cisco Unity, Cisco Call Manager, MeetingPlace, IP Phones, AS5350, AS5400.
raykaush
New Member
Posts:
1
Joined:
Wed May 23, 2012 2:00 pm

Translation pattern for passcode for 1 IP Phone in a network

Wed May 23, 2012 2:01 pm

Hello



I am trying to create a passcode for 1 IP Phone in a Network and have the following configuration in place as shown below:



The plan is that when this IP Phone wants to dial out they will have to dial out the a 4 digit number 5798 followed by the number they want to dial out.

The Router i am using is a CCME

Can you please let me know if this configuration will help setup according to the above description? Or can you please suggest any changes that i need to implement to make this work..



!

voice translation-rule 1

rule 1 /^5798\(.*\)/ /195\1/

!

voice translation-profile PHONE1

translate called 1

!

dial-peer voice 195 pots

huntstop

destination-pattern 195

port 0/1/1

!

ephone-dn 8

number 195

label IPPhone # 8

description 195

translation-profile incoming PHONE1

!



Any advice will be most grateful.



Many Thanks in advance



Regards



Kaushik

User avatar
Carlitos_30
Post Whore
Posts:
1222
Joined:
Mon Feb 08, 2010 9:30 am
Certs:
CCENT, CCNA,CCNP R&S

Re: Translation pattern for passcode for 1 IP Phone in a net

Wed May 23, 2012 6:16 pm

rule 1 /^5798\(.*\)/ /195\1/


From Ephone 8, when someone dials 5798XXXX (or 5798T if you prefer), the CME will replace the 5798 part for 195, so the call will be 195XXXX (or 195T).

Is that what you want?

Note: Use test voice translation-rule 1 to test the translation.

'

Return to Cisco Voice and Video

Who is online

Users browsing this forum: No registered users and 10 guests